Concrete Overlay in Chattanooga, Huntsville & Nashville

Visit our concrete overlay showrooms in Huntsvillle, Chattanooga and Nashville. Concrete overlay is an excellent option if you have existing concrete and want to change the look of the surface. Whether you want to create a stamped concrete surface or add texture to a slick surface by using a broomed overlay, these products are effective tools to use without having to remove existing concrete. In many cases preparation and cleaning to the existing surface may be necessary to apply a concrete overlay. It is recommended that you use Butterfield Color’s T1000 bonding primer before applying any of these concrete overlay products to your surface. However, if extensive cracking and ground settling have damaged the existing surface, concrete overlay may not be a cost effective option over time.

Stamped Concrete Overlay

< Click image to enlarge
T100 Stampable Concrete Overlay is polymer modified product that can transform an existing concrete surface into a stamped texture of your choosing. This overlay material is available in gray or white and is used in conjunction with Uni-Mix Integral Color Packs to create a consistent colored and stamped concrete surface. The coverage rate for this product will vary depending on the depth at which it is applied. The recommended depth of 3/8” will yield 16 square feet per 55 pound bag of material. Similar to stamping new concrete, use an Antique Release or a Liquid Release and Liquid Antiquing to add an accent color to your grout lines and textures. After these processes have been completed and the overlay material has had time to cure, use an appropriate sealer for the location to seal and protect the color and surface. Learn more about how to stamp concrete here.

Butterfield Color Training Video
T1000™ Stampable Overlay

Fine Concrete Overlay

< Click image to enlarge
T1000 Fine concrete overlay is a polymer modified product that can be used in resurfacing or decorative concrete overlay applications. Similar to stampable overlay, this product is available in gray and white and can be combined with Uni-Mix Integral Color Packs to create a consistent color across the existing concrete surface. Application of this product is determined by the desired effect, but T1000 Fine overlay can be applied with a hopper gun for a spray texture or stencil, a gauge rake for proper depth, or a hand trowel. You can use a concrete broom with this product to add a light texture to the surface for slip resistance. Depending on the depth desired the square footage may vary, but at 1/8” this product yields 48 square feet per 55 pound bag. After the product has been applied to the surface and given time to cure, use an appropriate concrete sealer for the location to seal and protect the color and surface.

Butterfield Color Training Video
T1000™ Fine Overlay

Concrete Resurfacer

< Click image to enlarge
Butterfield Color’s MT Resurfacer is a polymer modified micro topping that is used to create an abrasion resistant surface ideal for restoring worn or color blemished concrete. This micro topping is available in cement gray for a base or fine grade. MT Resurfacer can be applied with a squeegee or hand trowel and yields 96 square feet per 25 pound bag when applied at 1/16”. After allowing the product to cure for 72 hours, concrete stain can be applied to the surface.

Bonding Primer

< Click image to enlarge
T1000 Bonding primer is a bonding agent that aids in the adhesion of concrete overlay to an existing surface. When diluted per manufacturer specifications, one gallon of bonding primer will cover 200 square feet, but may vary depending on porosity and condition of the surface.

Trutop Micro-topping™

< Click image to enlarge
Thin concrete overlay mix that can be applied on floors and walls. Available in a white or gray mix, our thin overlay can be colored with any of our 30 standard overlay colors. Surecrete TruTop™ Color Tech Data Sheet

SureBroom™

< Click image to enlarge
A Concrete broom overlay mix that comes in a gray or white mix. Patio or driveway concrete overlay is for sold or damaged concrete with SureCrete’s just add water mix and when applied properly, our broom overlay product test well over 6000 PSI when cured. Surecrete SureBroom™ Tech Data Sheet

SureTex™

< Click image to enlarge
Concrete knockdown overlay that has larger slightly larger aggregate than other overlays to help creates deeper textures and designs. SureTex is specially formulated for quicker dry time and can be applied with a trowel or sprayed with a hopper gun. This overlay is easy to mix, just add water and one of SureCrete’s standard 30 overlay colors. Surecrete SureTex™ Tech Data Sheet

Flash Patch™

< Click image to enlarge
A single component cement based thin concrete repair patching compound system providing a workable, no-slump patch that sets quickly for the quicker return to service. Available in a white portland cement formulation, just add water! Surecrete Flash Patch™ Tech Data Sheet

Surebond™

< Click image to enlarge
A concrete bonding agent for overlays and cement repair products. SureBond is a just add water product available in a 50-pound bag in a white powder form that can be colored with any of SureCrete color packs including gray. Surecrete SureBond™ Tech Data Sheet

Deep Patch™

< Click image to enlarge
A solid concrete repair product for patching large holes in concrete surfaces. SureCrete’s solid cement filler is a single component, just add water cement based chemical patching compound system providing a patch that goes from 1/8″ (0.32 cm) and up. Deep Level, previous name, offers superior power to patch larger spalls in concrete floors, build ramps, repair loading docks, and parking lot pavement. Surecrete Deep Patch™ Tech Data Sheet